edenproject.comContact usCookies policy


Medium Chicken Lodge

Medium sized chicken lodge made from recycled plastic and available in four colours.

Similar to our medium chicken house, except the lodge has integral legs that raise it off the ground.

Design features:

  • Made primarily from 9mm thick recycled polyethylene
  • Suitable for a maximum of 4 larger birds or 7 bantams.
  • Two nest boxes
  • Two removable perches
  • Door design means it won’t trap dirt in the door slots
  • Quick & easy access to the nest box
  • Carry handles are cut into the roof, so it is easy to move.

Access to inspect the birds can be gained via a full width back door which detaches using quick release pins. When the door is removed, there is no ‘lip’ on the floor edge.


The roof removes in seconds allowing easy access for cleaning. To clean the nest box simply remove two quick release pins and lift off the lid. The entire nest box can be completely removed for cleaning by undoing more quick release pins.

There a few crevices for pests (such as red mite) to hide in, and the house can be thoroughly cleaned very easily – in seconds if you have a pressure washer and it will dry out very quickly.  


This chicken lodge has permanent under-eave ventilation, as well as two adjustable circular vents. Even though the sides are made from black plastic, the house remains surprisingly cool, even in strong, direct summer sunlight.


  • Overall dimensions: 106 (w) x 100 (h) x 137 (d) cm (including ramp, roof overhang and nest boxes)
  • House dimensions: 78 (w) x 100 (h) x 100 (d) cm (excluding ramp, roof overhang and nest boxes)
  • Internal floor space: 59 (w) x 80 (d) cm (excluding nest boxes)
  • Nest boxes: 2, each 28 (w) x 23-30 (h) x 30 (d) cm (internal measurement)
  • Ground clearance: 22.5cm
  • Perches: 2 perches, each 59cm usable length

Price: £368.00



The chicken lodge is delivered flat-packed and can be quickly assembled by following the comprehensive instructions in our User Guide - you should allow about an hour for this if it is the first time you have assembled one of our houses.

Most parts are held together using clips made from our own waste plastic, though quick release clips (linch pins) and some other parts are metal.


Being plastic, the house requires no routine maintenance.

Recycled Plastic

This chicken lodge is manufactured from flat sheets (2.4 x 1.2 m) of recycled plastic, typically 6, 9 or 12 mm thick, sourced from a plastic recycler.

Standard sheets are black in colour. A thin coating can be applied during manufacture to provide a coloured surface on one side. Additives are used to make the plastic ‘UV stable’, to minimise colour fade when exposed to sunlight. Sheets are smooth on one side and have a lightly textured ‘hatch’ pattern on the other.

The recycled plastic is made entirely from used food-grade plastic, primarily post-industrial waste. All plastic waste from the manufacturing process is returned for recycling to make more plastic sheet – this makes manufacture almost a zero waste process.

Some of the off-cut plastic is recycled to make the small 'Pi Clips' supplied to hold the houses together. The metal fasteners are made from stainless steel or other rustproof alloys, to provide a long outdoor life. Being metal, they can all be recycled.

How your gift makes a difference

The Eden Project is an educational charity and social enterprise and when you buy anything from our shop, you're supporting our work and educational programmes.

Our projects range from gardening schemes for the disabled or the homeless through to wild play schemes that help young kids reconnect with the world around them.

Watch this video to get a taste of our projects.

You might also like...

Chicken Barn

Chicken Barn


Chicken House Leg Set

Chicken House Leg Set


Chicken Wagon

Chicken Wagon